24W Microwave Radar Sensor Ceiling Light with single lighting function

  • 24W Microwave Radar Sensor Ceiling Light with single lighting function
  • 24W Microwave Radar Sensor Ceiling Light with single lighting function
24W Microwave Radar Sensor Ceiling Light with single lighting function
Operating Voltage: AC160-260V
Model: MS-XDSL-24W
Size: Φ300*H100MM
Color temperature: 3000k/4000k/6500K
CRI: 80
Working environment: -20~90℃
Material: Metal chassis, acrylic mask
Light range: ≤5-8LUX
Sensing distance: 5~8 meters
Induction angle: 160*360°
Delay time: 30±10S
Control method: Radar induction
Power: 24W
Sleep power: /
  • 产品介绍

Introduction

The structure of the radar induction ceiling lamp is basically divided into a light source integrated induction module, a driving circuit and a heat dissipation device, and the LED bulb lamp product with low energy consumption, long life, high luminous efficiency and environmental protection is created;

Scope of application: energy-saving automatic lighting public places such as corridors, corridors, bathrooms, basements, garages, warehouses, and monitoring.


Features

Intelligent induction: When someone enters the detection range of this product, the microwave detector works to light the light. When the person leaves the detection range, the light is automatically turned off. It automatically recognizes day and night.

Intelligent delay: The switch automatically delays one cycle after detecting each activity of the human body, and takes the delay time of the last human activity as the starting point.

Working mode: After the sensing module is turned on, if there is human activity during the delay time period, the switch will continue to be connected until the person leaves and delays the time.

Intelligent photosensitive control: According to the external light intensity, to control whether the switch works, to achieve energy saving effect.

The delay time of the ceiling lamp specification: double-bright mode, the trigger sensor light is fully bright wattage, and it is turned to 3W after leaving the sensing area 20S; the light-off mode triggers the sensor light to be fully bright wattage, and the light is off after leaving the sensing area 20S


Precautions 

1. Prohibit live installation operation, no load short circuit

2. Prohibit the use of super load power

3. When the wall thickness is less than 10 cm, the switch may be insulated by the wall.

4. In the sensing area, do not have obstacles that affect its detection or objects that keep moving.

5. Do not use the object as the installation base


Application space

1531193655703094711.jpg


上一页
下一页